Have questions? TRAK sales representatives are available for live chat now WELCOME TO TRAK MACHINERY!

replacement of sand by marble powder in concrete

  • Effects of Partial Replacement of Cement with Marble Dust ...

    the percentage of marble dust powder for up to 10% partial replacement of cement with marble dust powder. With further increase in the percentage of marble dust powder the split tensile strength of concrete decreases.

  • partial replacement of sand by granite powder - fablabni.eu

    Effect on Partial Replacement of Fine Aggregate and Cement . Sachin (2010)[2] used Marble Powder and artificial sand or manufactured sand as partial replacement for natural sand to conduct their study on mechanical behavior of concrete.

  • Compressive Strength Characteristic of Concrete ...

    increases with the increase in marble powder and stone dust. It is found that the optimum percentage replacement of cement by marble powder and sand by stone dust which gives the maximum strength for M 20 and M 30 grade concrete is 10% marble powder and 20% stone dust.

  • Effect on Partial Replacement of Fine Aggregate and …

    replacement of cement and sand both partially & combined with the waste marble powder/waste marble granules in which, by the partial replacement of cement and sand…

  • Project on Partial Replacement of Cement with Marble Powder

    In this project our main objective is to study the influence of partial replacement of cement with marble powder , and to compare it with the compressive and tensile strength of ordinary M20 concrete. We are also trying to find the percentage of marble powder replaced in concrete that makes the strength of the concrete maximum.

  • Study of Compressive Strength of Concrete by Partial ...

    The evaluation of Marble Dust Powder for use as a replacement of cement material begins with the concrete testing. The study is conducted to analyze the compressive strength of concrete when the base materials, i.e. cement is replaced with marble dust powder respectively. The marble dust powder replacement was

  • Study On Concrete Using Marble Powder Waste As Partial ...

    Since this concrete is prepared with marble powder as a partial replacement of fine aggregate (Sand) in four different proportions i.e. 10%, 20%, 30% and 40% and tested for the period of 7days, 28days, 90days curing.

  • Partial Replacement of Cement with Marble Dust and Fine ...

    3.Tostudythe influence of partial replacement of cement with marble powder and fine aggregates with a stone dust, and to compare it with the compressive and tensile strength of ordinary M30 concrete. 4.We are also trying to find the percentage of marble powder and stone dust replaced in …

  • Replacement of cement and sand in concrete with Waste ...

    of replacement of cement, sand and cement & sand both with marble dust powder or marble waste product in 0% and 10%. According to this graph the highest flexural strength were achieved by replacement of 10% sand with marble waste product as compared to 0% replacement of cement ,sand …

  • cement dust replacement - kleinejanamsterdam.nl

    Steel Dust As Replacement For Sand In Concrete. ... cement with 10% replacement of Marble dust powder is less as compared to cement with 0% replacement of marble dust powder. Marble dust powder is a waste product and is available free of cost. 6. PREPRATION OF SPECIMENS: Concrete cube of size 150mm*150mm*150mm were casted for determining the ...

  • EXPERIMENTAL STUDY OF CONCRETES MADE WITH …

    using the granite powder and iron powder as a partial replacement of sand in concrete. Twenty cubes and ten beams of concrete with GP and twenty cubes and ten beams of concrete with IP

  • PARTIAL REPLACEMENT OF CEMENT WITH WASTE MARBLE …

    percentage for replacement of marble powder with cement and it ... with sand production. The design of concrete (M25) was done with locally available materials. Cement was replaced with replacements levels of cement (0%, 4%, 8%, 12%, 16%, and 20%). Four numbers of cubes of 150 X 150 X 150 and

  • Influence of limestone waste as partial replacement ...

    One mix was control (normal concrete mix), three mix incorporating lime stone waste 25%, 50% and 75% replacement from sand. Twelve mixes incorporating lime stone waste 25%, 50% and 75% replacement from sand with marble powder as additive by percent 5, 10, and 15% by cement weight.

  • THE EFFECTS OF REPLACEMENT OF CEMENT AND SAND IN …

    cement and sand with marble powder ranging from 5% to 20% at an increment of 5% by weight.. For each replacement value, two classes of concrete, M-35 and M-40, mixes were prepared for both cement and sand replacement cases.

  • Influence of limestone waste as partial replacement ...

    stone waste 25%, 50% and 75% replacement from sand. Twelve mixes incorporating lime stone waste 25%, 50% and 75% replacement from sand with marble powder as additive by percent 5, 10, and 15% by cement weight. Phase II, the above experiment is repeated with the same components but with different content of cement. This content is 450 kg/m3.

  • Research Paper PARTIAL REPLACEMENT OF CEMENT WITH …

    increased with addition of waste marble powder up to 10% replace by weight of cement and further any addition of waste marble powder the Split Tensile strength decreases. • Thus we found out the optimum percentage for replacement of marble powder with cement and it is almost 10% cement for both cubes and cylinders.

  • Experimental study on partial replacement of cement by ...

    properties of concrete made with Marble powder and Quarry sand and to study the various important aspects such as compressive strength, flexural strength and split tensile strength of concrete prepared by using Marble powder and quarry sand and with different percentage of replacements

  • Use of Waste Marble Powder as Partial Replacement in ...

    marble dust powder on the concrete mix by partially replacing cement and sand with the marble powder dust. In this project, we check the effect on mechanical and physical properties of a concrete mix if varying marble powder dust is partially replaced in the concrete mix. 1.1 Research Significance

  • Investigation on Strength Properties of Concrete with ...

    3.5 Marble Powder The specific gravity of marble is 2.577. Local available marble powder used as partial replacement of fine aggregate in concrete. 3.6 Granite Powder Granite belongs to igneous rock family. Granite powder obtained from the polishing units and the properties were found.

  • Influence of Marble Powder Mortar and Concrete Mix

    The use of waste marble powder (dust) was proposed in partial replacement of cement, for the production of Mortar and Concrete Mix. In particular, tests were conducted on the mortars and concrete mix cured for different times in order to determine their workability, flexural as …

  • Review on the feasibility of Marble Dust as Replacement of ...

    waste marble powder construction industry itself as fine aggregate replacing natural sand in concrete. The replacement is done partially and fully in the proportion 0%, 25%, 50% and and its effect on concrete properties were analyzed and outcomes that replacement of 50% of sand with marble powder is

  • Green Concrete by using Industrial Waste Material- fly ash ...

    In M25 concrete mix 50% of cement was replaced by fly ash and sand was totally replaced by 50% of quarry dust and 50% of marble powder. Keywords:-Green concrete, fly ash, quarry dust, marble powder, compressive strength, split tensile strength.

  • BEHAVIOUR OF CONCRETE BY PARTIAL REPLACEMENT OF ... - YouTube

    Dec 14, 2015· behaviour of concrete by partial replacement of cement and sand with marble powder and quarry dust

  • An Experimental investigation on utilizations of Marble ...

    The durability as well as workability has increased to large extent by use of marble dust as replacement of fine aggregate and coarse aggregate. The effect on properties of concrete were investigated and concluded that optimum percentage for replacement of sand with marble powder in concrete …

  • Partial Replacement of Cement With Marble Powder in Concrete

    In this paper explained about the behavior of concrete with partial replacement of cement with added percentage values of marble powder and attain required strength. Partial replacement of marble powder in cement accordingly in the range of 20%, 30%, 40%, by weight for M20 grade of concrete.

  • Review Paper On “Effective Partial Replacement Of Cement ...

    Review Paper On “Effective Partial Replacement Of Cement And Sand With Fly-Ash And Marble Powder To Make Green Concrete” Darzi Musaib A.1,Bhumre Shivkumar2, Kamble Ashok3, Giri Sunil C.4, Kamble Rupesh5, Seham Khaleel6 1 BE Student, Department of civil Engineering, Sinhgad Academy of Engineering, Pune, India.

  • granite waste powder use project report - classicworks.nl

    Partial Replacement of Cement With Marble Powder in Concrete. In this project our main objective is to study the influence of partial replacement of cement with marble powder, and to compare it with the compressive and tensile strength of ordinary M20 concrete.

  • Experimental study of concrete made with granite and iron ...

    The concrete mix made using granite powder (GP) and iron powder (IP) as partial replacement of sand showed good workability and fluidity similar to normal concrete mixes. 2. The compressive strength of concrete increased with the addition of granite powder (GP) as partial replacement of sand.

  • Partial Replacement of Cement to Concrete by Marble Dust ...

    Partial Replacement of Cement to Concrete by Marble Dust Powder and threatening both agriculture and public health. Therefore, utilization of the marble dust in various industrial sectors especially the construction, agriculture, glass and paper industries would help to protect the environment.

  • Replacement of Fine Aggregates by Mixture of Ceramic and ...

    ceramic and marble powder the compressive and tensile strength of the concrete mix increased, with its maximum value at full replacement of conventional fine aggregate by ceramic and marble powder. Keywords: Compressive strength, Split cylinder test, Slump test, Water-Cement ratio, Ceramic and marble mixture, Mix design.